|
 ® |
Quality Assurance &
Quality Control
Rembar Instrumentation and Metrology Laboratory
|
| Previously, we have relied strictly on mill certification and warehouse
assurance. We spend enormous
amounts of energy and time providing our customers assurance on
product quality. However, the industries today are demanding complete
traceability of quality,
which involves collecting and recording all information from their alloy materials.
Our NITON
XLt898 Alloy Analyzer has
allowed us to give our customers the required elemental analysis in
a fraction of the time. Mill certification and heat stamps
originate by assurances of metal quality given by the suppliers or
by testing using direct comparison to standard materials. |
|
The Alloy Analyzer allows us to analyzes metals for their alloying
elements including
Ti,
Cr, Mn, Fe, Co,
Ni, Cu, Zn, Zr, Cb(Nb),
Mo,
TZM,
Hf,
Ta,
W,
Th, and more.
We
can provide a reliable method for nondestructive verification of incoming material;
to be certain that what you receive is what you ordered.
The XLt898
utilizes X-Ray Fluorescence (XRF) technology
to analyze metal samples in forms ranging
from solid parts to turnings or powders. |
|
Quality Assurance and Quality Control (QA/QC)
are
considered essential in our industry. Product components constructed using
out-of-spec materials
can produce results ranging
from the inconvenient to
the disastrous. MIL Spec
documentation gives little assurance of product
quality, with an estimated
70 percent of material
mix-ups resulting from incorrect
MIL Spec
documentation. |
 |
|
- Mitutoyo Surface Roughness Tester SJ-301 -
|
The manufacturing industries (ranging from small metal fabricators to major
aerospace manufacturers) rely on Rembar for material verification. All of our parts and material are
clearly tagged and bar coded. Rembar uses state of the art equipment to achieve Quality Assurance and Quality Control.
Mitutoyo Surface Roughness tester allows us to measure and document the specified surface required.
Each Type of surface finish is truly and consistently reproduced with a realistic idea of the feel, appearance and texture of the machined components.
|
| Our OGP
SmartScope Flash 200 benchtop metrology system includes state-of-the-art video measurement with
a touch trigger probes and easy-to-use software. Inspections are easy, automated and
accurate. This gives us the ability to insure precision
measuring capability.
Accuracy :
E2 = (1.8 + 6L/1000) µm (XY)
E1 = (3.5 + 6L/1000) µm (Z)
E1 = (1.0 + 6L/1000) µm (Z)
with our TP-200 touch probe
L = measuring length in mm. |
|
With our tools of high standards, Rembar
can offer complete traceability
of material assurance and quality fabrication of parts.
|
